Products

AccessoriesAccessories

Accessories

Power Tools: ​A power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools. The most common types of power tools use electric motors. Internal combustion engines and compressed air are also commonly used. Other power sources include steam engines, direct burning of fuels and propellants, such as in powder-actuated tools, or even natural power sources such as wind or moving water. Tools directly driven by animal power are not generally considered power tools.

Automatic Air Release ValveAir Release Valve

Air Release Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Air Release Valve: Air Release Valves, or Air Relief Valve function to release air pockets that collect at each high point of a full pressured pipeline. An air release valve can open against internal pressure, because the internal lever mechanism multiplies the float force to be greater than the internal pressure.

Allen KeysAllen Keys

Allen Keys

Allen Keys: A hex key, Allen wrench or Allen key, is a simple tool used to drive bolts and screws with hexagonal sockets in their heads. The tool is usually formed of a single piece of hexagonal rod of hard steel, with blunt ends that are meant to fit snugly into the screw’s socket, bent in an “L” shape with unequal arms.

Anti Fatigue MatAnti Fatigue Kitchen Mats

Anti Fatigue Mat

Anti Fatigue Mat
Standing for long periods on surfaces like cement floors can cause fatigue. Fatigue-reducing mats are used to counter this problem which can be made from materials like rubber, foam, vinyl, etc.

Why use it?
While standing for a longer time, body parts like muscles, tendons, ligaments, nerves, soft tissues, bones, and joints may lead to serious medical problems over time. The cushioning available in these mats provide comfort underfoot. It allows subtle foot movement, due to which muscle contraction and expansion occurs. This also helps in proper blood flow in the body. A proper mat helps in reducing fatigue and pain in the muscle.

How much does it cost?

Safety isn’t expensive, it’s priceless. Mats are anti-slip and provide improved standing comfort. This leads to safety for workers, reducing the risk of slipping and tripping. This leads to increased productivity of workers.

Balancing Valve ManufacturersBalancing Valve Manufacturers

Balancing Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Balancing Valve: A balancing valve controls water flow and balances heat and cooling distribution to different locations. The purpose of the valve is to enable us to supply the correct amount of heat and cooling to each part of the building.

Ball Valve ManufacturerBall Valve Manufacturers in India

Ball Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC

PVC Floor TilesPVC Interlocking Tiles

Best Quality PVC Interlocking Floor Tile Manufacturers in India

PVC Tiles also known as PVC Interlocking Tiles are solutions for industries where many people walk through or vehicles like forklifts & trolleys move. In these work environments, the Flooring is prone to damages and decreased life of floors. To increase life expectancy by an average of two to three times, Induskart brings you Tiepro interlocking PVC floor Tiles. These are easy to install, can be reused, and are quick to dismantle and moved to another location if you chose to shift.

Bitumen Coating SheetsBitumen Coating Sheets

Bitumen Coating Sheets

Bitumen Coating Sheet: Bitumen sheets are mainly used for waterproofing. And it can use for both residential and commercial buildings. It protects the roof deck from the rain before the roofing is put in. It provides an additional weather barrier just in case of blow offs or water penetration through the roofing or flashing. It protects the roofing from any resins that bleed out of the overlay. It helps forestall unevenness within the roof overlay from telegraphing through the shingles.

Blind Flange ManufacturersBlind Flange Manufacturers

Blind Flange Manufacturers

Blind Flange: A blind flange is a solid flange as shown below. The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping).

Blow Down ValveBlow Down Valve in Boiler

Blow Down Valve

Blow Down Valve: Blowdown valves are commonly used in boilers in order to drain dissolved solids from the boiler water. These valves are fitted on the drain lines of the boilers. One or multiple blowdown valves are used in boilers depending upon its design and purpose.

Boiler Blow Off ValveBlow Down Valve

Blow Off Valve

Blow Off Valve: A blow-off valve (BOV), dump valve or compressor bypass valve (CBV), is a pressure release system present in most turbocharged engines. Its main purpose is to take the load off the turbocharger when the throttle is suddenly closed.

Bonnet Wheel ValveBonnet Wheel Valve

Bonnet Wheel Valve

Bonnet Wheel Valve: The cover for the opening sin the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside.

Both Side Gum PattiBoth Side Gum Patti

Both Side Gum Patti

Both Side Gum Patti: Created by applying a thin adhesive layer to each side of a carrier substrate material, double sided tape, also known as double-coated tape or double-faced tape, is widely used by a vast array of industries for applications such as bonding, holding, mounting, splicing and packaging.

BreakersBreakers

Breakers

Breakers: A Breakers is a powerful tool meant to break down large walls made of concrete. There are a variety of sizes and styles that you can purchase. A demolition hammer is not just meant to use on walls but can be used on any material that is thick, bulky and solid.

Breather Valve

Breather Valve

Breather valvesBreather valves are extensively used valves in pressure conditions for closed tanks or other closed storage container conditions. They are also used in floating covers conditions to avoid functional loss. These are crucially important valves for preventing damage from pressure and vacuum build-up. Induskart brings to you the best in the industry most functionally sound breather valves online. Breather valves are also known as Pressure or Vacuum Relief Valves. Now you can find the best quality breather valves from different breather valve manufacturers and suppliers in the same place. You can easily compare features and prices. We bring to you a wide variety, sizes, shapes, and forms of breather valves to select from.

Bullet AnchorsBullet Anchors

Bullet Anchors

Bullet Anchors: ​Bullet type anchor shell with internal thread for pre-positioned installation. When the bullet is placed in shell & hit with a setting tools it slides forward & the inside part of shell expands and takes the grip in the wall.

Butterfly Valves ManufacturerButterfly Valves Manufacturers

Butterfly Valve

Butterfly valves are very similar to ball valves they also work on the phenomenon of quarter-turn rotational movement which means by moving 90 degrees it could be either turned on to fully operated or turned off to restrict the flow of fluid. This is used to transfer, regulate or stop the movement of a fluid. They are used widely in the industries such as food processing, water supply industries, water pumping, etc. they are used wherein there is a need for a broad range of flow isolation Is required. “They belong from the quarter-turn family” and they usually have large pipe diameter.

Carbide ToolsCarbide Tools

Carbide Tools

Carbide Tools: Carbide tipped tools retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds that reduce machining cycle time. Carbide tipped tools improve surface finish and hold size far longer for better quality.

Cast Iron PipeCast Iron Pipe

Cast Iron Pipe

Cast Iron Pipe: Cast iron pipe is a pipe which has had historic use as a pressure pipe for transmission of water, gas and sewage, and as a water drainage pipe during the 17th, 18th, 19th and 20th centuries.

Chain Pulley BlocksChain Pulley Blocks

Chain Pulley Blocks

Chain Pulley Blocks: A Chain Block (also known as a hand chain hoist) is a mechanism used to lift and lower heavy loads using a chain. Chain blocks contain two wheels which the chain is wound around. When the chain is pulled, it winds around the wheels and begins to lift the item that is attached to the rope or chain via a hook.

Check ValveCheck Valve Supplier

Check Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Check Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Chemical Anchor FastenerChemical Anchor Bolt

Chemical Anchor

Chemical Anchors IndusKart

Anchoring is a usual process in industries. Induskart presents a range of Anchors and Fastener solutions for Industries at the same place and with sufficient information on each of them. With this goal, Induskart brings you Anfagro Brand, A wide range of Chemical Anchor to choose from.

What is Chemical Anchoring? 

Chemical anchoring is a process in which resin is injected into a hole before the insertion of the stud. With the insertion of resin, all the irregularities and flaws of the hole are sealed airtight with approximately 100% adhesion. Chemical anchors provide superior load capacity as there is no embedment limit with chemical anchors. One can embed any length of the rod in the hole to increase load capacity. The option of selecting a larger diameter rod while embedment is also possible with chemical anchoring. This is the reason Chemical anchors have more audience than other forms of anchors

Chemical GunChemical Gun

Chemical Gun

Chemical Gun: ​An electrothermal-chemical gun uses a plasma cartridge to ignite and control the ammunition’s propellant, using electrical energy to trigger the process. Electrothermal-chemical technology is part of a broad research and development program that encompasses all electric gun technology, such as railguns and coil guns.

ClampsClamps

Clamps

Clamps: ​Clamps are versatile tools that serve to temporarily hold work securely in place. They are used for many applications including carpentry, woodworking, furniture making, welding, construction and metal working.

Control UnitControl Unit

Control Unit

Rubber Expansion Joint Assembled with Control Unit offered comprise quality finished rubber expansion joints that feature rubber construction which helps in resisting stresses. Providing for tight sealing support with pipes, these can be made available in both standards as well as customized specifications as defined by the clients. Further, the expansion joint arches can also be filled with soft-rubber filler for preventing settling of solids

Copper Pipe SuppliersCopper Pipe Manufacturers in India

Copper Pipe

Copper Pipe: Copper pipes are commonly used in the construction industry for water supply lines and refrigerant lines in HVAC (heating, cooling, and air-conditioning) systems. Copper pipes can be manufactured as soft or rigid copper and offer excellent corrosion-resistance and reliable connections

Ms Flange ManufacturerMS Flanges Manufacturers In India 

CS Flanges

Get high-quality Carbon Steel Flanges at the best prices. Flanges are basic mechanical devices used to connect pipes, valves, pumps, and more. They are circular and usually welded or threaded with each other.

They come in two pieces, which are later joined by bolting with the gaskets. It helps the pipes to stay sealed and prohibit the leaking of material. The flanges are types of coupling up two lines.

The diameter and length of flanges depend upon the size of the pipes. There are various types of flanges available in the market namely Round Neck, Weld Neck Flanges, Socket Welded Flanges, Slip-On Flanges, etc.

Cutting MachinesCutting Machines

Cutting Machines

Cutting Machines: Cutting Machine. a machine used for cutting out parts of articles from layers of cloth card webs or knitted fabric. Cutting machines with a band saw are used for the clean cutting of pieces of articles from the parts of the layer. The material is moved manually on the cutting-machine table in relation to the band saw.

D ShackleD Shackle

D Shackle

D Shackle: ​Also known as a chain shackle, D-shackles are narrow shackles shaped like a loop of chain, usually with a pin or threaded pin closure. D-shackles are very common and most other shackle types are a variation of the D-shackle. The small loop can take high loads primarily in line.

Diaphragm ValveDiaphragm Valve Manufacturers

Diaphragm Valve

Valve:Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Diaphragm Valve: Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, an elastomeric diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve body may be constructed from plastic, metal, wood or other materials depending on the intended use.

Drill MachinesDrill Machines

Drill Machines

Drill Machines: A drill is a tool primarily used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver, depending on application, secured by a chuck. Some powered drills also include a hammer function.

Drills vary widely in speed, power, and size. They are characteristically corded electrically driven devices, with hand operated types dramatically decreasing in popularity and cordless battery powered ones proliferating. Drills are commonly used in woodworking, metalworking, machine tool fabrication, construction and utility projects. Specially designed versions are made for medicine, space, and miniature applications.

Drill SleevesDrill Sleeves

Drill Sleeves

Drill Sleeves: Drill sleeve. (engineering) A tapered, hollow steel shaft designed to fit the tapered shank of a cutting tool to adapt it to the drill press spindle. Drill Sleeves are used to adapt smaller mores taper shank tools to larger machine spindles. The Concentricity and taper angles are precisely controlled which allows perfect locking and concentric movement to the tool held.

DrillsDrills

Drills

Drills: The drill’s mechanism is actually quite simple: A trigger switch activates an electric motor, which in turn drives a rotating chuck. Numerous accessories can fit into in the chuck, allowing the drill to bore holes, drive screws, and sand, polish, and grind a wide variety of materials.

Ear PlugEar Plug

Ear Plug

Ear Plug: An earplug is a device that is inserted in the ear canal to protect the user’s ears from loud noises, intrusion of water, foreign bodies, dust or excessive wind. Since they reduce the sound volume, earplugs are often used to help prevent hearing loss and tinnitus.

Elbow Pipe FittingPipe Fittings Manufacturers in India

Elbows

Elbows: An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. The ends may be machined for butt welding, threaded (usually female), or socketed. When the ends differ in size, it is known as a reducing (or reducer) elbow.

Electric Chain Pulley BlocksElectric Chain Pulley Blocks

Electric Chain Pulley Blocks

Electric Chain Pulley Blocks: Electric chain hoist consist of an induction motor with a break to hold the load lifted on it. It’s electrical panel board and the motor with pulley coupled to the hoist, with a pendant operating station hanging with the help of a steel wire rope at a height of the operator friendly use.

ElectrodeElectrode

Electrode

Electrode: An electrode is a solid electric conductor that carries electric current into non-metallic solids, or liquids, or gases, or plasmas, or vacuums. Electrodes are typically good electric conductors, but they need not be metals.

Ferrule CockFerrule Cock

Ferrule Cock

Ferrule Cock: Ferrule Cocks incorporate a packed gland spindle and have a union outlet for connection to all ferrule bends or adaptors. RMC TPFNR Ferrules are for under pressure tapping. They incorporate a non-return gunmetal jumper valve and a high-density polyethylene tapered closing plug.

Aluminum Filler WiresFiller Wires

Filler Wires

Filler Wires: Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by using high heat to melt the parts together and allowing them to cool causing fusion.

Fire Hydrant Landing ValveFire Hydrant Landing Valve

Fire Hydrant Landing Valve

Fire Hydrant Landing Valve: A Fire Hydrant Valve is a pipe fitting that help to regulate, direct or control the flow of fire suppressing agents by opening, closing or partially obstructing passageways in the hose connectors. Non-return valves stop the fire suppressing agent from flowing in the wrong direction.

Flat Face FlangeFlat Face Flange 

Flat Face Flange

Flat Face Flange: A flat faced flange, abbreviated as FF, is a flange that is machined flat and does not have a ridge like a raised face or ring type joint flange. The flat surface allows for the gasket to have full contact with the entire mating surface.

Float ValveBall Float Valve

Float Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Float Valve: Float Valve is an adverse condition which can occur at high engine speeds when the poppet valves in an internal combustion engine valve train do not properly follow the closure phase of the cam lobe profile. This reduces engine efficiency and performance and potentially increases engine emissions.

Foot ValveFoot Valve

Foot Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Foot Valve: A foot valve is a type of check valve that is typically installed at a pump or at the bottom of a pipe line (hence the name). Foot valves act like ball check valves, but have an open end with a shield or screen over it to block debris from entering the line.

Frame Fixing AnchorsFrame Fixing Anchors

Frame Fixing Anchors

Frame Fixing Anchors: Plastic frame fixings are the ideal solution for the fixing of facade constructions, roof substructures, heavy wall cabinets, squared timbers, cable trays, gates and doors. With the long plug shaft, these can be directly secured in the building substrate through the attachment part.

Full GasketsFull Gaskets

Full Gaskets

Full Gaskets: ​A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Gaskets allow for “less-than-perfect” mating surfaces on machine parts where they can fill irregularities.

Fusible Plug ManufacturersFusible Plug Manufacturers

Fusible Plug

Fusible Plug: A fusible plug operates as a safety valve when dangerous temperatures, rather than dangerous pressures, are reached in a closed vessel. In steam engines the fusible plug is screwed into the crown sheet (the top plate) of the firebox, typically extending about an inch (25mm) into the water space above it.

Gi Pipe Manufacturers in GujaratGi Pipe Manufacturers

G.I Pipe

Induskart is one of the leading GI Pipe Supplier in India. G.I Pipe: Galvanized iron pipes are made up of an alloy of iron or steel with a coating of zinc on it . This is done as zinc helps in the prevention of corrosion. This will help the pipe to get exposed to the environment without hesitating with the issue of rust.

GI pipe contains a large proportion of carbon in it which makes it hard. Pure iron in nature is very ductile and has no carbon in it. The zinc helps in giving it a longer period of life.

They are available in various variants and sizes. They are also comparatively cheap, lightweight, and cost-effective. GI pipes are used in many plumbing operations such as welding, treating sewage, sprinkler systems, etc.

Gas Plug ValveGas Valve

Gas Valve

Gas Valve: A gas control valve can be found on any appliance that utilizes gas. These valves are vital for the operation and safety of any gas appliance. The valve does exactly what it sounds like, it controls the amount of gas flowing to create a steady flow without allowing any gas to leak.

Gate Valve Manufacturers in IndiaGate Valve Manufacturers in India

Gate Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

Gauge CockGauge Cock

Gauge Cock

Gauge Cock: Gauge Cocks provide an economical way to shut off the flow of air to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Gauge Cocks are constructed from brass and are intended for use on air lines where leakage is not of concern.

Pressure GaugePressure Gauge Manufacturers In India

Gauges

Gauges: A gauge or gage, in science and engineering, is a device used to make measurements or in order to display certain dimensional information. A wide variety of tools exist which serve such functions, ranging from simple pieces of material against which sizes can be measured to complex pieces of machinery.

Globe Valve Manufacturer In IndiaGlobe Valve Manufacturer In India

Globe Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.,

Globe valve: A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During opening and closing of globe valve, disc moves perpendicularly to the seat.

Grease PumpGrease Pump

Grease Pump

Grease Pump: A grease gun is a common workshop and garage tool used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease fitting or ‘nipple’. The channels behind the grease nipple lead to where the lubrication is needed.

Grinder MachinesGrinder Machines

Grinder Machines

Grinder Machines: A grinding machine, often shortened to grinder, is one of power tools or machine tools used for grinding, it is a type of machining using an abrasive wheel as the cutting tool. Each grain of abrasive on the wheel’s surface cuts a small chip from the workpiece via shear deformation.

HammersHammers

Hammers

Hammers: A hammer is a tool consisting of a weighted “head” fixed to a long handle that is swung to deliver an impact to a small area of an object. This can be, for example, to drive nails into wood, to shape metal (as with a forge), or to crush rock. Hammers are used for a wide range of driving, shaping, and breaking applications.

Hand Gloves

Hand Gloves

Butterfly Valve: Butterfly Valve has a similar operation like Ball Valve. It is used to block the flow of Media (like Water, Chemical etc.). Generally, user preferred butterfly valve instead of ball valve because it is economical. It is available in Minimum size of 40mm. Butterfly valve has a simple structure which is contain Body, Seal, Stem, Rubber seat (Nitrile, EPDM, Viton), Disc (Sg Iron, SS) & Lever. It is easy to use by Lever & Gear. It will also operate by Actuator. Basically, up to 150mm butterfly valve is operated by Hand Lever & Above 150mm butterfly valve is Gear Operated.

There is various type of Butterfly Valves Like: –
According to Flow of circuit

  • Wafer Type Butterfly Valve
  • Semi Lug Type Butterfly valve.
  • Lug Type Butterfly valve.
  • Double Flanged Type Butterfly valve.
  • Motorized Butterfly valve.

Butterfly valve is also known as quarter-turn valves in the family of Valves. Butterfly valve has a different type of pressure rating & Different usage which depends on MOC of rubber & Disc. Butterfly valve available in SG Iron (Cast Iron), Cast Steel, SS304, SS316, Aluminum body.

HelmetsHelmets

Helmets

Helmets: Safety Helmets Color Code In Industry. Managers, foremen, engineers or supervisors usually wear white hats on site. Brown hats are worn by welders and other workers with high heat applications. Green often signifies a safety inspector but can also be used by new workers on the site or probationary staff.

Hydraulic & Manual JacksHydraulic & Manual Jacks

Hydraulic & Manual Jacks

Hydraulic & Manual Jacks: Working Principle of HYDRAULIC JACK or HYDRAULIC PRESS. The hydraulic jack is a device used for lifting heavy loads by the application of much smaller force. It is based on Pascal’s law, which states that intensity of pressure is transmitted equally in all directions through a mass of fluid at rest.

Industrial BeltsIndustrial Belts

Industrial Belts

Industrial Belts: ​Industrial belts are designed to transmit power between shafts and capable of moving at very high shaft speed. Industry has different use of industrial belts according to theirs need. These belts are round belts, v belts, flat belts, timing belt and PVC conveyor belt etc.

Industrial BrushesIndustrial Brush Corporation

Industrial Brush

Introduction to door seals

Exterior doors, by their design, are not capable to provide complete sealing against dust, cold air, insects and other pests. For doing so, the door will be required to be dragged on the floor itself. This is not practical as it will make it hard & create difficulty in opening and closing the door.To cater to this problem, door seals are used, which act as a barrier. These are of various kinds. Can be made up of brush-like bristles, rubber, or other material.

The use of Induskart offered high-quality metal door brush seal as sealing device is a proven successful barrier in industrial & household applications. The fine bristles in our seal are suitable for all surfaces including uneven ones. The flexible bristles provide almost frictionless movement to the doors. The seals are suitable for locking out light, air, dust, contamination and pests. They prevent a significant amount of air filtration which leads to energy saving also.

Insulating sleevesInsulating sleeves

Insulating sleeves

Insulating sleeves: Sleeves are used wherever cables need to be bundled and protected. They offer significant space savings and greater flexibility compared to conduits, for example. Whether it is mechanical protection, fire protection.

Knife Edge Gate Valve SupplierKnife Edge Gate Valve Manufacturer

Knife Edge Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Knife Edge Valve: Knife Edge Valve are designed mainly for on-off and isolation services in systems with high content of suspended solids. The knife gate valves are especially beneficial for handling slurry, viscous, corrosive and abrasive media. The valves have a minimized pressure drop in fully open position, they are easy to actuate, they have a relatively low weight and are cost effective.

Knife Edge Valve are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids.

Lap Joint Flange SuppliersLap Joint Flange

Lap Joint Flange

Induskart is a leading manufacturer specializing in lap joint flanges. With a deep understanding of industrial requirements and various applications, we provide high-quality flanges, especially tailored for the applications needing frequent inspections and cleaning. Our products, ranging from stainless steel to alloy materials, cater to diverse industries like pharmaceuticals, chemicals, water treatement, construction and oil & gas. Committed to certified excellence, expansive product range, and competitive pricing, Induskart stands as a trusted name for lap joint Flange Manufacturer in India.”

Lockout TaggingLockout Tagging

Lockout Tagging

Lockout Tagging: Lock Out, Tag Out, Lock Out, Tag Out, Try Out or lock and tag is a safety procedure used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or repair.

Marble CutterMarble Cutter

Marble Cutter

Marble Cutter: Power tools are used in industry, in construction, in the garden, for housework tasks such as cooking, cleaning, and around the house for purposes of driving (fasteners), drilling, cutting, shaping, sanding, grinding, routing, polishing, painting, heating and more.

Stone Cutting Machine also referred to as Tile/Marble cutting machine helps in constructing strong and visually beautiful buildings that can stand against the major test of time. You can opt for a product as per your specification from our wide range of marble cutting machines.

Mechanical Anchor FastenerMechanical Anchor Fastener

Mechanical Anchors

Mechanical Anchors from Induskart : Our mechanical anchors are designed to install easily and securely into a variety of base materials — from concrete and brick to hollow and grouted CMU. They offer optimal performance even in the most demanding structural applications. For applications where there is a risk of concrete cracking, specific anchors have been designed and tested to offer reliability under these conditions.

Metallic GasketsMetallic Gaskets

Metallic Gaskets

Metallic Gaskets: ​Metal Jacketed Gaskets, as the name suggests, consist of a metallic outer shell with either metallic or non-metallic compressed fiber filler. The filler material gives the gasket resilience, while the metal jacket protects the filler and resists pressures, temperatures, and corrosion.

Mobrey ValveMobrey Valve

Mobrey Valve

Mobrey Valve: Mobrey is the name used for the Automatic water level controller, it comes under the category of mountings and fittings of Steam Boiler Assembly. As the name suggests, it is used for maintaining the water level in the Boiler shell. It is mostly used in smoke tube steam boilers not in water tube boilers, as the shell diameter of the former is greater than that of latter irrespective of their running capacities and working pressures.

Motorized ActuatorMotorized Actuator

Motorized Actuator

Motorized Actuator: A valve actuator is the mechanism for opening and closing a valve. Manually operated valves require someone in attendance to adjust them using a direct or geared mechanism attached to the valve stem.

Ms Flange ManufacturerMS Flanges Manufacturers In India 

MS Flange Manufacturer in India: Induskart’s Pinnacle of Steel Mastery

Induskart stands as a symbol of excellence in the MS flange sector, positioned as a prominent MS Flanges Manufacturers in India. Through our vast network and strategic partnerships with other MS flange manufacturers and suppliers, especially in Vadodara, Rajkot, Bhavnagar, Ahmedabad in Gujarat and Mumbai, we ensure swift bulk supplies at competitive prices. We are deeply committed to quality, always following strict global standards and using the best materials. Offering a diverse range of products, from mild steel flanges to SS flanges and more, we cater to multiple industries. As an ISO-certified entity with strategic locations, we provide top-tier products at unmatched prices, making us the go-to for MS flanges in India.

Needle ValveNeedle Valve

Needle Valve

Needle Valve: A needle valve is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates.

Pipe Fittings indiaPipe Fittings Manufacturers

Nipples

Nipples: A nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings. The length of the nipple is usually specified by the overall length with thread. It may have a hexagonal section in the center for a wrench to grasp (sometimes referred to as a “hex nipple”), or it may simply be made from a short piece of pipe (sometimes referred to as a “barrel nipple” or “pipe nipple”). A “close nipple” has no unthreaded area; when screwed tightly between two female fittings, very little of the nipple remains exposed.

Non Return Valve Manufacturers In IndiaNon Return Valve Manufacturers In India

Non Return Valve

A non-return valve is a simple mechanical device that is used to allow a medium pressure flow in any one direction. It helps the fluid to travel with a medium velocity in one direction and prohibits the reverse flow of the fluid caused by very high pressure. The non-return valves cause a very high-pressure drop which is a drawback for it. it also helps to prevent the upstream types of equipment that could get damaged by reverse flow such as water pumps. They are also known as check valves. The non-return valves are available in various types such as clapper type, swing type, spring-loaded, etc. they could be manually operated or also by automated actuation.

Non Sparking ToolsNon Sparking Tools

Non Sparking Tools

Non Sparking Tools: Non-metals such as wood, leather and plastics can also be used to create non-sparking tools. Some common tools that are available in a non-sparking option include hammers, axes, pry bars, chisels, utility knives, mallets, pliers, screwdrivers, sockets and wrenches.

Nylon Concrete AnchorsNylon Anchor Fasteners

Nylon Anchor

Nylon Anchor: ​Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Pin Type AnchorPin Type Anchor

Pin Type Anchor

Pin Type Anchor: Pin type anchor bolts find their use in soft masonry to reduce the effect of vibration and pressure. The most significant advantage of using these bolts is that it can be replaced without affecting the holding strength of the anchor system.

Pneumatic Piston ValvePiston Valve

Piston Valve

Piston Valve: A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder. Examples of piston valves are: The valves used in many brass instruments. The valves used in pneumatic cannons.

Plastic Pipe FittingsPlastic Pipe Manufacturers

Plastic Pipe

Plastic Pipe: Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids.

PliersPliers

Pliers

Pliers: Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and compressing a wide range of materials.

Plug Valve Manufacturers in IndiaPlug Valve

Plug Valve

Plug Valve: Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

Pneumatic ActuatorPneumatic Actuator

Pneumatic Actuator

Pneumatic Actuator: A pneumatic control valve actuator converts energy into mechanical motion. The motion can be rotary or linear, depending on the type of actuator.

Pressure GaugePressure Gauge

Pressure Gauge

Pressure Gauge: Pressure measurement is the analysis of an applied force by a fluid (liquid or gas) on a surface. Pressure is typically measured in units of force per unit of surface area. Many techniques have been developed for the measurement of pressure and vacuum. Instruments used to measure and display pressure in an integral unit are called pressure meters or pressure gauges or vacuum gauges. A manometer is a good example, as it uses the surface area and weight of a column of liquid to both measure and indicate pressure. Likewise, the widely used Bourdon gauge is a mechanical device, which both measures and indicates and is probably the best-known type of gauge.

Pressure Reducing Valve ManufacturersPressure Reducing Valve

Pressure Reducing Valve

Pressure Reducing Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

PTFE GasketsPTFE Gaskets

PTFE Gaskets

PTFE Gaskets: Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. It is also known by the common trade name Teflon®, which is trademarked by DuPont. PTFE can be modified for use as a gasketing material with strong chemical resistance properties.

Raised Face Flange Raised Face Flange 

Raised Face

Raised Face Flange: The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face

ReamersReamers

Reamers

Reamers: A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides.

Rebaring ChemicalRebaring Chemical

Rebar Chemical

Rebar Chemical: Rebaring technique in reinforced concrete construction is a method for proper fabrication and placement of reinforcement bars as per the design and drawings for RCC works. The reinforcement bars are mainly patterned over its surface to facilitate proper bonding with the concrete.

Pipe Fittings in IndiaReducers

Reducers

Reducers: A reducer is a kind of pipe fitting used in process piping that reduces the pipe size from a larger bore to a smaller bore (inner diameter). A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system or to adapt to existing piping of a different size.

Reflux Valve ManufacturerReflux Valve

Reflux Valve

Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.

Relief ValvePressure Relief Valve

Relief Valve

Relief Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

Ring GasketsRing Gaskets

Ring Gaskets

Ring Gaskets: Ring Joint Gaskets. Ring Joint Gaskets. Sara metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles. Sara manufacturers in accordance with specific tolerances on CNC machines.

RTJ Face FlangeRTJ Face Flange

RTJ Face

RTJ Face: RTJ flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or “Coining”) the gasket to make Intimate Contact inside the grooves, creating a metal to metal seal. An RTJ flange may have a raised face with a ring groove machined into it.

Rubber Expansion Bellows Signle ArcRubber Expansion Bellows Signle Arc

Rubber Expansion Bellows Double Arc

Induskart rubber expansion joints are a type of flexible rubber element that is most suited for enduring movements between sections and for conveying fluids. These expansion joints are vital to between section movements. Induskart manufactures high-grade scientifically designed rubber expansion joints that have the potential to sustain and absorb axial, lateral, and angular movements. They are mediums to ensure insulation and safety against vibrations and noise. Rubber expansions make sure there are fewer friction incidents and less damage due to frictions. Thus, rubber expansions have a crucial role to play in functioning. These expansions must be made of high-grade rubber that not only sustains regular usage but also lasts long. If the rubber expansions are not made of good quality material the expansion joints are prone to wear and tear and there arises a need for regular replacements.

Induskart Rubber Expansions are made of the best quality rubber and other textile materials that give them superior flexibility and longer life. Rubber expansions manufactured from Induskart are available in many different size and shape options. They can also be customized according to some specific customer requirements. Rubber expansion joints are installed in air and gas duct systems in all power plants, gas turbine systems, diesel engine installations, petrochemical, and chemical plants, pump systems, cement works, steelworks, incinerators, on- and offshore systems, ships, and cruise vessels, etc. Rubber expansions work to reduce noise, isolate vibration, neutralize axial, angular, and lateral stress. They also play a role in extending the life of motive equipment. They also relieve the stress of equipment flanges. Induskart has made shopping and selection of Rubber expansions easy and effective. You can now browse technical details of rubber expansions online, select the right product of your choice, and order industry-grade high-quality rubber expansions in any quantity you like right at your doorstep. No more looking around for dealers and agents to help you with finding reliable good quality products and then pay double charges to get them delivered.

Rubber Expansion Bellows Signle ArcRubber Expansion Bellows Signle Arc

Rubber Expansion Bellows Signle Arc

Induskart rubber expansion joints are a type of flexible rubber element that is most suited for enduring movements between sections and for conveying fluids. These expansion joints are vital to between section movements. Induskart manufactures high-grade scientifically designed rubber expansion joints that have the potential to sustain and absorb axial, lateral, and angular movements. They are mediums to ensure insulation and safety against vibrations and noise. Rubber expansions make sure there are fewer friction incidents and less damage due to frictions. Thus, rubber expansions have a crucial role to play in functioning. These expansions must be made of high-grade rubber that not only sustains regular usage but also lasts long. If the rubber expansions are not made of good quality material the expansion joints are prone to wear and tear and there arises a need for regular replacements.

Induskart Rubber Expansions are made of the best quality rubber and other textile materials that give them superior flexibility and longer life. Rubber expansions manufactured from Induskart are available in many different size and shape options. They can also be customized according to some specific customer requirements. Rubber expansion joints are installed in air and gas duct systems in all power plants, gas turbine systems, diesel engine installations, petrochemical, and chemical plants, pump systems, cement works, steelworks, incinerators, on- and offshore systems, ships, and cruise vessels, etc. Rubber expansions work to reduce noise, isolate vibration, neutralize axial, angular, and lateral stress. They also play a role in extending the life of motive equipment. They also relieve the stress of equipment flanges. Induskart has made shopping and selection of Rubber expansions easy and effective. You can now browse technical details of rubber expansions online, select the right product of your choice, and order industry-grade high-quality rubber expansions in any quantity you like right at your doorstep. No more looking around for dealers and agents to help you with finding reliable good quality products and then pay double charges to get them delivered.

Rubber Floor Mats

Rubber Floor Mat

Rubber Flooring
Rubber flooring is getting popular as a preferred choice of surface in homes, manufacturing industries, gymnasiums, etc. They have also become an interior decorating option for many. These floorings are capable of handling heavy foot traffic and are distinctive in design. Either the application is for industrial purpose or home application, the attractive looking floorings enhances the area of application.

How are they made?
The rubber used in the manufacturing of these flooring is natural rubber or synthetic material. Sometimes special grade of material is also used as per application. These materials make the flooring highly durable and reduce maintenance costs. There is a variety of flooring defined as per the choice of application. Interlocking rubber flooring is one of the most used kinds available.

Safety Valve Manufacturers in IndiaSafety Valve Manufacturer

Safety Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Safety Valve: A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve, which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

Sanitary Fixing AnchorSanitary Fixing Anchor

Sanitary Fixing Anchor

Sanitary Fixing Anchor: Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Serrated WasherSerrated Washer

Serrated Washer

Serrated Washer:Induskart Engitech LLP brings this special kind of washer with serrations on its surface to prevent fastener loosening due to vibration. These are available in various metals, generally in carbon steel, spring steel and stainless steel.

ShoesShoes

Shoes

Shoes: All safety footwear must meet the minimum safety standards set out by the International Organization for Standardization (ISO). Under this standard, all safety footwear must now have toe protection against a 200-joule impact. This is the amount of energy the toe region can absorb before breaking.

Sight Glass ValveSight Glass Valve

Sight Glass Valve

Sight Glass Valve: A sight glass is a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within. Simple sight glasses may be just a plastic or glass tube connected to the bottom of the tank at one end and the top of the tank at the other.

Sleeve AnchorsSleeve Anchors

Sleeve Anchors

Sleeve Anchors: ​Sleeve anchors are the most versatile masonry expansion anchors because they can be used in a variety of base materials, including concrete, brick, and block. They are available in a wide variety of diameters, lengths, and head styles. The available head styles are acorn, hex nut, flat, countersunk, and round head.

Slip On Flange Slip On Flange

Slip On Flange

Slip On Flange: Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter. The OD of slip on flange is also welded on the back side of the flange.

Sluice Valve ManufacturerSluice Valve Manufacturer

Sluice Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Sluice Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

Socket Welding FlangeSocket Welding Flange

Socket Welding Flange

Socket Weld Flange: A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Pipe Fittings Manufacturers in IndiaSockets

Sockets

Sockets: A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

SpannersSpanners

Spanners

Spanners: A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning. In Commonwealth English, spanner is the standard term. The most common shapes are called open-ended spanner and ring spanner.

SprinklerSprinkler

Sprinkler

Sprinkler: A sprinkler is a device used to spray water. Sprinklers are used to water plants or grass, or to put out fires in buildings. a device perforated with small holes that is attached to a garden hose or watering can and used to spray plants, lawns, etc.

MS Flanges Manufacturers In India MS Flanges Manufacturers In India 

Ss Flanges Manufacturer In India

STAINLESS STEEL SS FLANGES

Induskart is the leading supplier of SS flanges. Flanges are basic mechanical devices used to connect pipes, valves, pumps, and more. They are circular and usually welded or threaded with each other.

They come in two pieces, which are later joined by bolting with the gaskets. It helps the pipes to stay sealed and prohibit the leaking of material. The flanges are types of coupling up two lines.

The diameter and length of flanges depend upon the size of the pipes. There are various types of flanges available in the market namely Round Neck, Weld Neck Flanges, Socket Welded Flanges, Slip-On Flanges, etc.

Stainless Steel Expansion BellowsStainless Steel Expansion Bellows

Stainless Steel Expansion Bellows

Bellows are a flexible piping element. The corrugation of the Metallic Expansion Joint is designed to be flexible in order to absorb pipe expansion and contraction due to changes in temperature. The number of corrugation of bellows is decided according to the displacement amount and the expansionary and contracting force that the bellows have to absorb. Bellows have to be strong to the design pressure and operating pressure of piping and installation and they also have to be flexible to absorb thermal movement. The thrust force of the flow in the piping has to be buttressed by things other than bellows. These are usually anchors, tie rods, hinges or gimbaled structures and our style ETR thrust restraints

Steam TrapSteam Trap

Steam Trap

Steam Trap: A steam trap is a device used to discharge condensates and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.

Stainless Steel Pipe FittingsStainless Steel Pipe Fittings

Steel Pipe

Steel Pipe: ​Steel pipes are found in a variety of places. Since they are strong, they are used underground for transporting water and gas throughout cities and towns. They are also employed in construction to protect electrical wires. While steel pipes are strong, they can also be lightweight.

Stop ValveSteam Stop Valve

Stop Valve

Stop Valve: Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.

Storage TrolleysStorage Trolleys

Storage Trolleys

Storage Trolleys: A toolbox could refer to several types of storage to hold tools. It could mean a small portable box that can carry a few tools to a project location or a large storage system set on casters. Modern toolboxes are predominantly metal or plastic.

Toolboxes can be mainly divided as 5 types:

  • Plastic
  • Steel
  • Aluminum
  • Waterproof
  • Cantilever
Strainer ValveStrainer Valve

Strainer Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Strainer: Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

Studs & NutsStuds & Nuts

Studs & Nuts

Studs & Nuts: ​A bolt with threads on both ends designed to be screwed permanently into a fixed part at one end and to receive a nut on the other. A bolt is a threaded fastener mated with a nut. A screw has either pre-formed or self-made external threads. A stud is an externally threaded headless fastener. One end mate with a tapped component and the other with a standard nut.

Tap SetsTap Sets

Tap Sets

Tap Sets: Tapping is when you threads are cut into a hole. A die set is used to cut threads onto a cylinder (bolt). To use a tap or a die, first determine the number of threads per inch (TPI) of the part to be fixed.

Pipe Fittings ManufacturersTee

Tee

Tee: Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.

Pressure Gauge

Temperature Gauges

Pressure Gauge: Pressure measurement is the analysis of an applied force by a fluid (liquid or gas) on a surface. Pressure is typically measured in units of force per unit of surface area. Many techniques have been developed for the measurement of pressure and vacuum. Instruments used to measure and display pressure in an integral unit are called pressure meters or pressure gauges or vacuum gauges. A manometer is a good example, as it uses the surface area and weight of a column of liquid to both measure and indicate pressure. Likewise, the widely used Bourdon gauge is a mechanical device, which both measures and indicates and is probably the best-known type of gauge.

Temperature GaugesTemperature Gauges

Temperature Gauges

Temperature Gauges: A temperature gauge is a device used to indicate the temperature of an item being monitored. The display can be an analog dial, an analog range, or a digital readout.

Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping

Sidebar