Ball Valve

Ball Valve Manufacturer
Ball Valve Manufacturers in India
Ball Valve Manufacturers in India
Ball Valve Manufacturer
Ball Valve Suppliers
Lightbox
Ball Valve Manufacturer
Ball Valve Manufacturers in India
Ball Valve Manufacturers in India
Ball Valve Manufacturer
Ball Valve Suppliers

Ball Valve

Previous product
Check Valve
Check Valve
Next product
Safety Valve Manufacturers in India
Safety Valve

In Stock

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC

Product Enquiry
Description

Types of Ball Valve
According to Flow of circuit

  • 2 Way Ball Valve (L type)
  • 3 Way Ball Valve (T type)

According to Design

  • Single Piece Design Ball Valve
  • Two Piece Design Ball Valve
  • Three Piece Design Ball Valve

According to MOC

  • PVC Ball Valve
  • Cast Steel Ball Valve
  • Cast Iron Ball Valve
  • Brass Ball Valve
  • SS Ball Valves

According to End Connection

  • Flanged End Ball Valve
  • Screwed End Ball Valve
  • TC End Ball Valve

According to the Operation

  • Electric Ball Valve
  • Manual Ball Valve
  • Pneumatic Ball Valve

Some of the Reputed brands in market manufacture Ball valves are Zoloto, Leader, Sant, Indusroof, L&T, Audco and many more.

We at Indusroof can supply all the above mentioned ball valves, and other valves as well for your project requirement.

Specializations
Operator:Lever Operated / Gear Operated
Body (MOC):Forged Brass Body / Forged Carbon Steel Body / Stainless Steel CF8 / SS304 Body / Bronze / Gun Metal Body / Bronze (Gun Metal) / Cast Iron / Cast Carbon Steel / SG Iron / Stainless Steel (SS202, SS304, SS316) / Cast Stainless Steel / Forged Brass / PP / HDPE / Forged Stainless Steel (F304, F316)
Pressure Rating:PN-10 / PN-16 / PN-25 / PN-40 / Class-125 / Class-150 / Class-300 / Class-600 / Class-800
MFG.STD:BS EN 12266 ‐ 2 / As per BS5351 / As per BS5159
ISI / Non-ISI:ISI & NON-ISI Both Available
IBR / Non-IBR:NON-IBR / IBR
Type:Y Type / Full Port Type / M.S Jacketed / Round / Square (Heavy Type) / Square / Eye Type / T-Port (3 Way) Type / Venturi Port Type / Extended Stem
End Connection:Screwed End (NPT/BSPT) / Flanged End / Socket Weld / Mixed End / TC End / Screwed End
Bore Type:Full Bore / Reduced Bore / Reduced Bore (Standard Bore) / Regular Bore / Full Bore
Design:3 PC Design / 1 PC Design / 2 PC Design / 3 Way Ball Valve

Related Products

Bonnet Wheel ValveBonnet Wheel Valve

Bonnet Wheel Valve

Bonnet Wheel Valve: The cover for the opening sin the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside.

View product
Product Enquiry
Gate Valve Manufacturers in IndiaGate Valve Manufacturers in India

Gate Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Butterfly Valves ManufacturerButterfly Valves Manufacturers

Butterfly Valve

Butterfly valves are very similar to ball valves they also work on the phenomenon of quarter-turn rotational movement which means by moving 90 degrees it could be either turned on to fully operated or turned off to restrict the flow of fluid. This is used to transfer, regulate or stop the movement of a fluid. They are used widely in the industries such as food processing, water supply industries, water pumping, etc. they are used wherein there is a need for a broad range of flow isolation Is required. “They belong from the quarter-turn family” and they usually have large pipe diameter.

View product
Product Enquiry
Non Return Valve Manufacturers In IndiaNon Return Valve Manufacturers In India

Non Return Valve

A non-return valve is a simple mechanical device that is used to allow a medium pressure flow in any one direction. It helps the fluid to travel with a medium velocity in one direction and prohibits the reverse flow of the fluid caused by very high pressure. The non-return valves cause a very high-pressure drop which is a drawback for it. it also helps to prevent the upstream types of equipment that could get damaged by reverse flow such as water pumps. They are also known as check valves. The non-return valves are available in various types such as clapper type, swing type, spring-loaded, etc. they could be manually operated or also by automated actuation.

View product
Product Enquiry
Gauge CockGauge Cock

Gauge Cock

Gauge Cock: Gauge Cocks provide an economical way to shut off the flow of air to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Gauge Cocks are constructed from brass and are intended for use on air lines where leakage is not of concern.

View product
Product Enquiry
Blow Down ValveBlow Down Valve in Boiler

Blow Down Valve

Blow Down Valve: Blowdown valves are commonly used in boilers in order to drain dissolved solids from the boiler water. These valves are fitted on the drain lines of the boilers. One or multiple blowdown valves are used in boilers depending upon its design and purpose.

View product
Product Enquiry
Plug Valve Manufacturers in IndiaPlug Valve

Plug Valve

Plug Valve: Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

View product
Product Enquiry
Globe Valve Manufacturer In IndiaGlobe Valve Manufacturer In India

Globe Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.,

Globe valve: A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During opening and closing of globe valve, disc moves perpendicularly to the seat.

View product
Product Enquiry
Gas Plug ValveGas Valve

Gas Valve

Gas Valve: A gas control valve can be found on any appliance that utilizes gas. These valves are vital for the operation and safety of any gas appliance. The valve does exactly what it sounds like, it controls the amount of gas flowing to create a steady flow without allowing any gas to leak.

View product
Product Enquiry
Check ValveCheck Valve Supplier

Check Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Check Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

View product
Product Enquiry
Sluice Valve ManufacturerSluice Valve Manufacturer

Sluice Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Sluice Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Stop ValveSteam Stop Valve

Stop Valve

Stop Valve: Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.

View product
Product Enquiry
Mobrey ValveMobrey Valve

Mobrey Valve

Mobrey Valve: Mobrey is the name used for the Automatic water level controller, it comes under the category of mountings and fittings of Steam Boiler Assembly. As the name suggests, it is used for maintaining the water level in the Boiler shell. It is mostly used in smoke tube steam boilers not in water tube boilers, as the shell diameter of the former is greater than that of latter irrespective of their running capacities and working pressures.

View product
Product Enquiry
Pressure Reducing Valve ManufacturersPressure Reducing Valve

Pressure Reducing Valve

Pressure Reducing Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Sight Glass ValveSight Glass Valve

Sight Glass Valve

Sight Glass Valve: A sight glass is a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within. Simple sight glasses may be just a plastic or glass tube connected to the bottom of the tank at one end and the top of the tank at the other.

View product
Product Enquiry
Boiler Blow Off ValveBlow Down Valve

Blow Off Valve

Blow Off Valve: A blow-off valve (BOV), dump valve or compressor bypass valve (CBV), is a pressure release system present in most turbocharged engines. Its main purpose is to take the load off the turbocharger when the throttle is suddenly closed.

View product
Product Enquiry
SprinklerSprinkler

Sprinkler

Sprinkler: A sprinkler is a device used to spray water. Sprinklers are used to water plants or grass, or to put out fires in buildings. a device perforated with small holes that is attached to a garden hose or watering can and used to spray plants, lawns, etc.

View product
Product Enquiry
Reflux Valve ManufacturerReflux Valve

Reflux Valve

Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.

View product
Product Enquiry
Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping