Sluice Valve

Sluice Valve Manufacturer
Sluice Valve Manufacturer
Ci Sluice Valve Manufacturer
Ci Sluice Valve Manufacturer
Sluice Valve Manufacturer
Lightbox
Sluice Valve Manufacturer
Sluice Valve Manufacturer
Ci Sluice Valve Manufacturer
Ci Sluice Valve Manufacturer
Sluice Valve Manufacturer

Sluice Valve

Previous product
Knife Edge Gate Valve Supplier
Knife Edge Valve
Next product
Gate Valve Manufacturers in India
Gate Valve

In Stock

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Sluice Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

Product Enquiry
Specializations
Operator:Hand Wheel Operated / Cap Operated / Gear Operated
Body (MOC):Cast Iron / Ductile Iron / Bronze (Gun Metal) / Forged Carbon Steel / Cast Carbon Steel / Stainless Steel (SS304.SS316) / Forged Stainless Steel (F304,F316) / Forged Brass
Pressure Rating:PN-10 / PN-16 / PN-20 / Class-125 / Class-150 / Class-300 / Class-800 / Class-600 / Class-900/ Class-1500 / Class-2500 / Class-(1,2,3) / 20kg/cm2 (300 Lbs) / 35 Kgf/cm2 500(LBS)
Stem (MOC):Stainless Steel Stem with Gun Metal Parts / S.S. (IS:6603 12 Cr.13) / SS(AISI410)/ SS (MI 410) / SS 410 / Forged Brass / SS(ASTM A182 F6a) / Stainless Steel as per IS 6603 / High Tensile Brass as per IS 320
Stem Type:Non Rising Stem / Rising Stem
Pattern / Type:Hex Type / Peg Type / Screwed & Yoke Type / Clip Pattern / Straight Pattern / Standard Bore / Peglar Type / Standard Pattern / Hattersley Type
ISI / Non-ISI:ISI & Non-ISI Both available
IBR / Non-IBR:IBR & Non IBR-Both available
End Connection:Flanged End / Plain End / Screwed End / Socket Weld End / Butt Weld End / Lug Type
TEMP:250 C degree

Related Products

Gauge CockGauge Cock

Gauge Cock

Gauge Cock: Gauge Cocks provide an economical way to shut off the flow of air to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Gauge Cocks are constructed from brass and are intended for use on air lines where leakage is not of concern.

View product
Product Enquiry
Safety Valve Manufacturers in IndiaSafety Valve Manufacturer

Safety Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Safety Valve: A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve, which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

View product
Product Enquiry
Foot ValveFoot Valve

Foot Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Foot Valve: A foot valve is a type of check valve that is typically installed at a pump or at the bottom of a pipe line (hence the name). Foot valves act like ball check valves, but have an open end with a shield or screen over it to block debris from entering the line.

View product
Product Enquiry
Ball Valve ManufacturerBall Valve Manufacturers in India

Ball Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC

View product
Product Enquiry
Mobrey ValveMobrey Valve

Mobrey Valve

Mobrey Valve: Mobrey is the name used for the Automatic water level controller, it comes under the category of mountings and fittings of Steam Boiler Assembly. As the name suggests, it is used for maintaining the water level in the Boiler shell. It is mostly used in smoke tube steam boilers not in water tube boilers, as the shell diameter of the former is greater than that of latter irrespective of their running capacities and working pressures.

View product
Product Enquiry
Diaphragm ValveDiaphragm Valve Manufacturers

Diaphragm Valve

Valve:Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Diaphragm Valve: Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, an elastomeric diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve body may be constructed from plastic, metal, wood or other materials depending on the intended use.

View product
Product Enquiry
Plug Valve Manufacturers in IndiaPlug Valve

Plug Valve

Plug Valve: Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

View product
Product Enquiry
Reflux Valve ManufacturerReflux Valve

Reflux Valve

Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.

View product
Product Enquiry
Blow Down ValveBlow Down Valve in Boiler

Blow Down Valve

Blow Down Valve: Blowdown valves are commonly used in boilers in order to drain dissolved solids from the boiler water. These valves are fitted on the drain lines of the boilers. One or multiple blowdown valves are used in boilers depending upon its design and purpose.

View product
Product Enquiry
Stop ValveSteam Stop Valve

Stop Valve

Stop Valve: Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.

View product
Product Enquiry
Bonnet Wheel ValveBonnet Wheel Valve

Bonnet Wheel Valve

Bonnet Wheel Valve: The cover for the opening sin the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside.

View product
Product Enquiry
Knife Edge Gate Valve SupplierKnife Edge Gate Valve Manufacturer

Knife Edge Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Knife Edge Valve: Knife Edge Valve are designed mainly for on-off and isolation services in systems with high content of suspended solids. The knife gate valves are especially beneficial for handling slurry, viscous, corrosive and abrasive media. The valves have a minimized pressure drop in fully open position, they are easy to actuate, they have a relatively low weight and are cost effective.

Knife Edge Valve are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids.

View product
Product Enquiry
Pressure Reducing Valve ManufacturersPressure Reducing Valve

Pressure Reducing Valve

Pressure Reducing Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Relief ValvePressure Relief Valve

Relief Valve

Relief Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Check ValveCheck Valve Supplier

Check Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Check Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

View product
Product Enquiry
Pneumatic Piston ValvePiston Valve

Piston Valve

Piston Valve: A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder. Examples of piston valves are: The valves used in many brass instruments. The valves used in pneumatic cannons.

View product
Product Enquiry
Strainer ValveStrainer Valve

Strainer Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Strainer: Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

View product
Product Enquiry
Non Return Valve Manufacturers In IndiaNon Return Valve Manufacturers In India

Non Return Valve

A non-return valve is a simple mechanical device that is used to allow a medium pressure flow in any one direction. It helps the fluid to travel with a medium velocity in one direction and prohibits the reverse flow of the fluid caused by very high pressure. The non-return valves cause a very high-pressure drop which is a drawback for it. it also helps to prevent the upstream types of equipment that could get damaged by reverse flow such as water pumps. They are also known as check valves. The non-return valves are available in various types such as clapper type, swing type, spring-loaded, etc. they could be manually operated or also by automated actuation.

View product
Product Enquiry
Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping