Disc: | Brass / Bronze SS / (AISI410) / Cast Iron / Cast carbon Steel / SS (SS304,SS316 ) / Renewable Disc (Rubber, Teflon, Plug Type, Flat Disc Plug) |
Operator: | Hand Wheel Operated / Gear Operated |
Body (MOC): | Bronze (Gun Metal) / Cast Iron / Cast Carbon Steel / Forged Carbon Steel / Forged Stainless Steel (F304,F316) / Stainless Steel (SS304,SS316) / Forged Alloy Steel |
Pressure Rating: | Class-100 / Class-150 / Class-300 / Class-600 / Class-800 / Class-900 / Class-1500 / Class-2500 / Class-1 / Class-2 / Class-3 / PN-10 / PN-16 / PN-25 / PN-25 / PN-40 / ND – 40 |
Type: | Angle Type / Yoke Type / Outside Screwed And Yoke Type / Bolted Bonnet Type Design / Screwed Bonnet Type Design / Y Type |
ISI / Non-ISI: | ISI & Non-ISI Both Available |
IBR / Non-IBR: | IBR & Non-IBR Both Available |
Pattern: | Straight Pattern / Stardard Bore / Right Angle Pattern Typy |
End Connection: | Screwed End / Flanged End / One Side Flanged End / Socket Weld End / Butt Weld End |
Temp: | 250 C degree |
Bore Type: | Full Bore |
Globe Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.,
Globe valve: A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During opening and closing of globe valve, disc moves perpendicularly to the seat.
Related Products
Non Return Valve
A non-return valve is a simple mechanical device that is used to allow a medium pressure flow in any one direction. It helps the fluid to travel with a medium velocity in one direction and prohibits the reverse flow of the fluid caused by very high pressure. The non-return valves cause a very high-pressure drop which is a drawback for it. it also helps to prevent the upstream types of equipment that could get damaged by reverse flow such as water pumps. They are also known as check valves. The non-return valves are available in various types such as clapper type, swing type, spring-loaded, etc. they could be manually operated or also by automated actuation.
Butterfly Valve
Butterfly valves are very similar to ball valves they also work on the phenomenon of quarter-turn rotational movement which means by moving 90 degrees it could be either turned on to fully operated or turned off to restrict the flow of fluid. This is used to transfer, regulate or stop the movement of a fluid. They are used widely in the industries such as food processing, water supply industries, water pumping, etc. they are used wherein there is a need for a broad range of flow isolation Is required. “They belong from the quarter-turn family” and they usually have large pipe diameter.
Stop Valve
Stop Valve: Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.
Steam Trap
Steam Trap: A steam trap is a device used to discharge condensates and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.
Needle Valve
Needle Valve: A needle valve is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates.
Piston Valve
Piston Valve: A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder. Examples of piston valves are: The valves used in many brass instruments. The valves used in pneumatic cannons.
Diaphragm Valve
Valve:Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Diaphragm Valve: Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, an elastomeric diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve body may be constructed from plastic, metal, wood or other materials depending on the intended use.
Bonnet Wheel Valve
Bonnet Wheel Valve: The cover for the opening sin the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside.
Float Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Float Valve: Float Valve is an adverse condition which can occur at high engine speeds when the poppet valves in an internal combustion engine valve train do not properly follow the closure phase of the cam lobe profile. This reduces engine efficiency and performance and potentially increases engine emissions.
Plug Valve
Plug Valve: Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.
Gas Valve
Gas Valve: A gas control valve can be found on any appliance that utilizes gas. These valves are vital for the operation and safety of any gas appliance. The valve does exactly what it sounds like, it controls the amount of gas flowing to create a steady flow without allowing any gas to leak.
Breather Valve
Breather valves : Breather valves are extensively used valves in pressure conditions for closed tanks or other closed storage container conditions. They are also used in floating covers conditions to avoid functional loss. These are crucially important valves for preventing damage from pressure and vacuum build-up. Induskart brings to you the best in the industry most functionally sound breather valves online. Breather valves are also known as Pressure or Vacuum Relief Valves. Now you can find the best quality breather valves from different breather valve manufacturers and suppliers in the same place. You can easily compare features and prices. We bring to you a wide variety, sizes, shapes, and forms of breather valves to select from.
Gate Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.
Ball Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC
Blow Down Valve
Blow Down Valve: Blowdown valves are commonly used in boilers in order to drain dissolved solids from the boiler water. These valves are fitted on the drain lines of the boilers. One or multiple blowdown valves are used in boilers depending upon its design and purpose.
Reflux Valve
Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.
Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.
Fire Hydrant Landing Valve
Fire Hydrant Landing Valve: A Fire Hydrant Valve is a pipe fitting that help to regulate, direct or control the flow of fire suppressing agents by opening, closing or partially obstructing passageways in the hose connectors. Non-return valves stop the fire suppressing agent from flowing in the wrong direction.
Safety Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Safety Valve: A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve, which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.