Knife Edge Valve

Knife Edge Gate Valve Supplier
Knife Edge Gate Valve Manufacturer
Knife Edge Gate Valve Supplier
Knife Edge Gate Valve
Lightbox
Knife Edge Gate Valve Supplier
Knife Edge Gate Valve Manufacturer
Knife Edge Gate Valve Supplier
Knife Edge Gate Valve

Knife Edge Valve

Previous product
Float Valve
Float Valve
Next product
Sluice Valve Manufacturer
Sluice Valve

In Stock

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Knife Edge Valve: Knife Edge Valve are designed mainly for on-off and isolation services in systems with high content of suspended solids. The knife gate valves are especially beneficial for handling slurry, viscous, corrosive and abrasive media. The valves have a minimized pressure drop in fully open position, they are easy to actuate, they have a relatively low weight and are cost effective.

Knife Edge Valve are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids.

Product Enquiry
Specializations
Disc:Forged Brass Body / Forged Carbon Steel Body / Stainless Steel Cf8 /Ss304 Body / Bronze (Gun Metal Body) / Cast Iron / Cast Carbon Steel / SG Iron / Stainless Steel (SS202, SS304, SS316) / Cast Stainless Steel / Forged Brass / PP / HDPE / Forged Stainless Steel (F304, F316)
Operator:Hand Wheel Operated
Body (MOC):Forged Brass Body / Forged Carbon Steel Body / Stainless Steel Cf8 /Ss304 Body / Bronze (Gun Metal Body) / Cast Iron / Cast Carbon Steel / SG Iron / Stainless Steel (SS202, SS304, SS316) / Cast Stainless Steel / Forged Brass / PP / HDPE / Forged Stainless Steel (F304, F316)
Pressure Rating:Class-125 / Class-150 / Class-300 / Class-600 / Class-800 / Class-1500 / Class-900 / Class-2500 / PN-6 / PN-10 / PN-16 / PN-20 / PN-25 / PN-30 / PN-40 / PN-100 / Class-1 / Class-2 / 20 kgf/cm2 (300 LBS) / 40 kgf/cm2 (600 LBS) / 40 kg/cm2 (600 LBS)
Type:Horizontal Type / Vertical Type / Swing Type Non Return Valve / Feed Check Valve Type/ Angle Type / Lift Check Valve Wafer Type / Dual Plate Type / Disc Check Valve Type / Wafer Type / Ball Type / Piston Lift Up Type / Flap Type / O.S And Yoke Type / Y Type
ISI / Non-ISI:ISI & Non-ISI Both Available
IS Standar:IS : 778/1980/ IS:5312/ IS 5312
IBR / Non-IBR:IBR & Non-IBR Both Available
End Connection:Hex Type / Peg Type / Screwed & Yoke Type / Clip Pattern / Straight Pattern / Standard Bore / Peglar Type / Standard Pattern / Hattersley Type
TEMP:100 C degree / 250 C degree
Bore Type:Reduced Bore/ Full Bore/ Standard Bore
Design:1 PC Design / 2 PC Design / Wafer type / Flanged type

Related Products

Sluice Valve ManufacturerSluice Valve Manufacturer

Sluice Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Sluice Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Gate Valve Manufacturers in IndiaGate Valve Manufacturers in India

Gate Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Breather Valve

Breather Valve

Breather valves : Breather valves are extensively used valves in pressure conditions for closed tanks or other closed storage container conditions. They are also used in floating covers conditions to avoid functional loss. These are crucially important valves for preventing damage from pressure and vacuum build-up. Induskart brings to you the best in the industry most functionally sound breather valves online. Breather valves are also known as Pressure or Vacuum Relief Valves. Now you can find the best quality breather valves from different breather valve manufacturers and suppliers in the same place. You can easily compare features and prices. We bring to you a wide variety, sizes, shapes, and forms of breather valves to select from.

View product
Product Enquiry
Butterfly Valves ManufacturerButterfly Valves Manufacturers

Butterfly Valve

Butterfly valves are very similar to ball valves they also work on the phenomenon of quarter-turn rotational movement which means by moving 90 degrees it could be either turned on to fully operated or turned off to restrict the flow of fluid. This is used to transfer, regulate or stop the movement of a fluid. They are used widely in the industries such as food processing, water supply industries, water pumping, etc. they are used wherein there is a need for a broad range of flow isolation Is required. “They belong from the quarter-turn family” and they usually have large pipe diameter.

View product
Product Enquiry
Steam TrapSteam Trap

Steam Trap

Steam Trap: A steam trap is a device used to discharge condensates and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.

View product
Product Enquiry
SprinklerSprinkler

Sprinkler

Sprinkler: A sprinkler is a device used to spray water. Sprinklers are used to water plants or grass, or to put out fires in buildings. a device perforated with small holes that is attached to a garden hose or watering can and used to spray plants, lawns, etc.

View product
Product Enquiry
Balancing Valve ManufacturersBalancing Valve Manufacturers

Balancing Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Balancing Valve: A balancing valve controls water flow and balances heat and cooling distribution to different locations. The purpose of the valve is to enable us to supply the correct amount of heat and cooling to each part of the building.

View product
Product Enquiry
Mobrey ValveMobrey Valve

Mobrey Valve

Mobrey Valve: Mobrey is the name used for the Automatic water level controller, it comes under the category of mountings and fittings of Steam Boiler Assembly. As the name suggests, it is used for maintaining the water level in the Boiler shell. It is mostly used in smoke tube steam boilers not in water tube boilers, as the shell diameter of the former is greater than that of latter irrespective of their running capacities and working pressures.

View product
Product Enquiry
Non Return Valve Manufacturers In IndiaNon Return Valve Manufacturers In India

Non Return Valve

A non-return valve is a simple mechanical device that is used to allow a medium pressure flow in any one direction. It helps the fluid to travel with a medium velocity in one direction and prohibits the reverse flow of the fluid caused by very high pressure. The non-return valves cause a very high-pressure drop which is a drawback for it. it also helps to prevent the upstream types of equipment that could get damaged by reverse flow such as water pumps. They are also known as check valves. The non-return valves are available in various types such as clapper type, swing type, spring-loaded, etc. they could be manually operated or also by automated actuation.

View product
Product Enquiry
Gauge CockGauge Cock

Gauge Cock

Gauge Cock: Gauge Cocks provide an economical way to shut off the flow of air to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Gauge Cocks are constructed from brass and are intended for use on air lines where leakage is not of concern.

View product
Product Enquiry
Pressure Reducing Valve ManufacturersPressure Reducing Valve

Pressure Reducing Valve

Pressure Reducing Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Boiler Blow Off ValveBlow Down Valve

Blow Off Valve

Blow Off Valve: A blow-off valve (BOV), dump valve or compressor bypass valve (CBV), is a pressure release system present in most turbocharged engines. Its main purpose is to take the load off the turbocharger when the throttle is suddenly closed.

View product
Product Enquiry
Ferrule CockFerrule Cock

Ferrule Cock

Ferrule Cock: Ferrule Cocks incorporate a packed gland spindle and have a union outlet for connection to all ferrule bends or adaptors. RMC TPFNR Ferrules are for under pressure tapping. They incorporate a non-return gunmetal jumper valve and a high-density polyethylene tapered closing plug.

View product
Product Enquiry
Strainer ValveStrainer Valve

Strainer Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Strainer: Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

View product
Product Enquiry
Ball Valve ManufacturerBall Valve Manufacturers in India

Ball Valve

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC

View product
Product Enquiry
Reflux Valve ManufacturerReflux Valve

Reflux Valve

Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.

View product
Product Enquiry
Fire Hydrant Landing ValveFire Hydrant Landing Valve

Fire Hydrant Landing Valve

Fire Hydrant Landing Valve: A Fire Hydrant Valve is a pipe fitting that help to regulate, direct or control the flow of fire suppressing agents by opening, closing or partially obstructing passageways in the hose connectors. Non-return valves stop the fire suppressing agent from flowing in the wrong direction.

View product
Product Enquiry
Relief ValvePressure Relief Valve

Relief Valve

Relief Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping