Wedge anchors are mechanical devices to be installed in a solid concrete base only. They are one of the types of anchor bolts. Wedge anchors cannot be used in other base materials like cement or brick. They are holed in the concrete permanently and drilling into the concretes creates an exceptional holding capacity. The name wedge anchor is the generic name, but they may be called with other names such as kwik bolts. Once this is holed inside, the nut is rotated clockwise which pulls the action body up and slides down the expansion clip creating a tight bond between the anchor body and the concrete material. They are used for various concrete applications, but below down are mentioned applications of wedge anchors.

Applications

• Construction sites
• Fence posts
• Light posts
• Concrete staircase
• Railings

Nylon Anchor: ​Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Mechanical Anchors from Induskart : Our mechanical anchors are designed to install easily and securely into a variety of base materials — from concrete and brick to hollow and grouted CMU. They offer optimal performance even in the most demanding structural applications. For applications where there is a risk of concrete cracking, specific anchors have been designed and tested to offer reliability under these conditions.

Studs & Nuts: ​A bolt with threads on both ends designed to be screwed permanently into a fixed part at one end and to receive a nut on the other. A bolt is a threaded fastener mated with a nut. A screw has either pre-formed or self-made external threads. A stud is an externally threaded headless fastener. One end mate with a tapped component and the other with a standard nut.

Sanitary Fixing Anchor: Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.

Pin Type Anchor: Pin type anchor bolts find their use in soft masonry to reduce the effect of vibration and pressure. The most significant advantage of using these bolts is that it can be replaced without affecting the holding strength of the anchor system.

Chemical Anchors IndusKart

Anchoring is a usual process in industries. Induskart presents a range of Anchors and Fastener solutions for Industries at the same place and with sufficient information on each of them. With this goal, Induskart brings you Anfagro Brand, A wide range of Chemical Anchor to choose from.

What is Chemical Anchoring? 

Chemical anchoring is a process in which resin is injected into a hole before the insertion of the stud. With the insertion of resin, all the irregularities and flaws of the hole are sealed airtight with approximately 100% adhesion. Chemical anchors provide superior load capacity as there is no embedment limit with chemical anchors. One can embed any length of the rod in the hole to increase load capacity. The option of selecting a larger diameter rod while embedment is also possible with chemical anchoring. This is the reason Chemical anchors have more audience than other forms of anchors